PLANET WGS3-24240 - Manual (Page 401)

User’s Manual of WGS3-24000 / WGS3-24240
401
assert registration for the same attribute in order to maintain uninterrupted service. There is an instance of this timer on a
per-Port, per-GARP participant basis. Permissible values are 20 to 600 centiseconds (0.2 to 6.0 seconds). The factory
default is 60 centiseconds (0.6 seconds). The finest granularity of specification is 1 centisecond (0.01 seconds).
▫ LeaveAll Timer - This Leave All Time controls how frequently LeaveAll PDUs are generated. A LeaveAll PDU indicates
that all registrations will shortly be deregistered. Participants will need to rejoin in order to maintain registration. There is
an instance of this timer on a per-Port, per-GARP participant basis. The Leave All Period Timer is set to a random value in
the range of LeaveAllTime to 1.5*LeaveAllTime. Permissible values are 200 to 6000 centiseconds (2 to 60 seconds). The
factory default is 1000 centiseconds (10 seconds). The finest granularity of specification is 1 centisecond (0.01 seconds).
▫ Port GMRP Mode - Indicates the GMRP administrative mode for the port. It may be enabled or disabled. If this parameter
is disabled, Join Time, Leave Time and Leave All Time have no effect. The factory default is disabled.
▫ Port GVRP Mode - Indicates the GVRP administrative mode for the port. It may be enabled or disabled. If this parameter
is disabled, Join Time, Leave Time and Leave All Time have no effect. The factory default is disabled.
8.6.37 show gvrp configuration
This command displays Generic Attributes Registration Protocol (GARP) information for one or all interfaces.
▫ Format show gvrp configuration {<slot/port> | all}
▫ Mode Privileged EXEC and User EXEC
▫ Interface - This displays the slot/port of the interface that this row in the table describes.
▫ Join Timer - Specifies the interval between the transmission of GARP PDUs registering (or re-registering) membership
for an attribute. Current attributes are a VLAN or multicast group. There is an instance of this timer on a per-Port,
per-GARP participant basis. Permissible values are 10 to 100 centiseconds (0.1 to 1.0 seconds). The factory default is 20
centiseconds (0.2 seconds). The finest granularity of specification is 1 centisecond (0.01 seconds).
▫ Leave Timer - Specifies the period of time to wait after receiving an unregister request for an attribute before deleting the
attribute. Current attributes are a VLAN or multicast group. This may be considered a buffer time for another station to
assert registration for the same attribute in order to maintain uninterrupted service. There is an instance of this timer on a
per-Port, per-GARP participant basis. Permissible values are 20 to 600 centiseconds (0.2 to 6.0 seconds). The factory
default is 60 centiseconds (0.6 seconds). The finest granularity of specification is 1 centisecond (0.01 seconds).
▫ LeaveAll Timer - This Leave All Time controls how frequently LeaveAll PDUs are generated. A LeaveAll PDU indicates
that all registrations will shortly be deregistered. Participants will need to rejoin in order to maintain registration. There is
an instance of this timer on a per-Port, per-GARP participant basis. The Leave All Period Timer is set to a random value in
the range of LeaveAllTime to 1.5*LeaveAllTime. Permissible values are 200 to 6000 centiseconds (2 to 60 seconds). The
factory default is 1000 centiseconds (10 seconds). The finest granularity of specification is 1 centisecond (0.01 seconds).
▫ Port GMRP Mode - Indicates the GMRP administrative mode for the port. It may be enabled or disabled. If this parameter
is disabled, Join Time, Leave Time and Leave All Time have no effect. The factory default is disabled.
▫ Port GVRP Mode - Indicates the GVRP administrative mode for the port. It may be enabled or disabled. If this parameter
is disabled, Join Time, Leave Time and Leave All Time have no effect. The factory default is disabled.