PLANET WGS3-24240 - Manual (Page 53)

User’s Manual of WGS3-24000 / WGS3-24240
53
4.2.3.8 Authentication List Configuration
Use this screen to configure login lists. A login list specifies the authentication method(s) you want used to validate switch or
port access for the users associated with the list. The pre-configured users, admin and guest, are assigned to a pre-configured
list named defaultList, which you may not delete. All newly created users are also assigned to the defaultList until you
specifically assign them to a different list
Figure 4-2-10 Authentication List Configuration – Create User
Figure 4-2-11 Authentication List Configuration – DefaultList
Selection Criteria
Object Description
• Authentication List Select the authentication login list you want to configure. Select 'create' to define
a new login list. When you create a new login list, 'local' is set as the initial
authentication method.
Configurable Data
Object Description