PLANET WGS3-24240 - Manual (Page 63)

User’s Manual of WGS3-24000 / WGS3-24240
63
Configurable Data
Object Description
• Host This is a list of the hosts that have been configured for syslog. Select a host for
changing the configuration or choose to add a new hosts from the drop down list.
• IP Address This is the ip address of the host configured for syslog.
• Port This is the port on the host to which syslog messages are sent. The default port
is 514. The default port is 514. Specify the port in the text field.
• Severity Filter A log records messages equal to or above a configured severity threshold. Select
the severity option by selecting the corresponding line on the pulldown entry field.
These severity levels have been enumerated below:
-Emergency (0) : system is unusable
-Alert (1) : action must be taken immediately
-Critical (2) : critical conditions
-Error (3) : error conditions
-Warning (4) : warning conditions
-Notice(5) : normal but significant conditions
-Informational(6) : informational messages
-Debug(7) : debug-level messages
Non Configurable Data
Object Description
• Status This specifies wether the host has been configured to be actively logging or not.
• Submit button Update the switch with the values you entered.
• Refresh button Refetch the database and display it again starting with the first entry in the table.
• Delete button Delete a configured host.
4.2.5.7 Persistent Log Configuration
A persistent log is a log that is stored in persistent storage. Persistent storage survives across platform reboots. The first log
type is the system startup log. The system startup log stores the first N messages received after system reboot. The second log
type is the system operation log. The system operation log stores the last N messages received during system operation.