PLANET WGS3-24240 - Manual (Page 454)

User’s Manual of WGS3-24000 / WGS3-24240
454
10.1.25 show dot1x
This command is used to show a summary of the global dot1x configuration, summary information of the dot1x configuration for
a specified port or all ports, the detailed dot1x configuration for a specified port and the dot1x statistics for a specified port -
depending on the tokens used.
▫ Format show dot1x [{summary {<slot/port> | all}} | {detail <slot/port>} | {statistics <slot/port>}]
▫ Mode Privileged EXEC
If none of the optional parameters are used, the global dot1x configuration summary is displayed.
▫ Administrative mode - Indicates whether authentication control on the switch is enabled or disabled.
If the optional parameter 'summary {<slot/port> | all}' is used, the dot1x configuration for the specified port or all ports are
displayed.
▫ Port -The interface whose configuration is displayed.
▫ Control Mode - The configured control mode for this port. Possible values are force-unauthorized / force-authorized/ auto
▫ Operating Control Mode - The control mode under which this port is operating. Possible values are authorized/
unauthorized
▫ Reauthentication Enabled - Indicates whether re-authentication is enabled on this port.
▫ Key Transmission Enabled - Indicates if the key is transmitted to the supplicant for the specified port
If the optional parameter 'detail <slot/port>' is used, the detailed dot1x configuration for the specified port are displayed.
▫ Port - The interface whose configuration is displayed.
▫ Protocol Version - The protocol version associated with this port. The only possible value is 1, corresponding to the first
version of the dot1x specification.
▫ PAE Capabilities - The port access entity (PAE) functionality of this port. Possible values are Authenticator or Supplicant.
▫ Authenticator PAE State - Current state of the authenticator PAE state machine. Possible values are Initialize,
Disconnected, Connecting, Authenticating, Authenticated, Aborting, Held, ForceAuthorized, and ForceUnauthorized.
▫ Backend Authentication State - Current state of the backend authentication state machine. Possible values are
Request, Response, Success, Fail, Timeout, Idle, and Initialize.
▫ Quiet Period - The timer used by the authenticator state machine on this port to define periods of time in which it will not
attempt to acquire a supplicant. The value is expressed in seconds and will be in the range 0 and 65535.
▫ Transmit Period - The timer used by the authenticator state machine on the specified port to determine when to send an
EAPOL EAP Request/Identity frame to the supplicant. The value is expressed in seconds and will be in the range of 1 and
65535.
▫ Supplicant Timeout - The timer used by the authenticator state machine on this port to timeout the supplicant. The value
is expressed in seconds and will be in the range of 1 and 65535.
▫ Server Timeout - The timer used by the authenticator on this port to timeout the authentication server. The value is
expressed in seconds and will be in the range of 1 and 65535.
▫ Maximum Requests - The maximum number of times the authenticator state machine on this port will retransmit an
EAPOL EAP Request/Identity before timing out the supplicant. The value will be in the range of 1 and 10.
▫ Reauthentication Period - The timer used by the authenticator state machine on this port to determine when
reauthentication of the supplicant takes place. The value is expressed in seconds and will be in the range of 1 and 65535.
▫ Reauthentication Enabled - Indicates if reauthentication is enabled on this port. Possible values are True or False.
▫ Key Transmission Enabled - Indicates if the key is transmitted to the supplicant for the specified port. Possible values