PLANET WGS3-24240 User Manual
Page 62
User’s Manual of WGS3-24000 / WGS3-24240
62
4.2.5.5 Event Log
This allows logging to any serial device attached to the host.
Figure 4-2-21 Event Log
Configurable Data
Object
Description
• Admin Status -
A log that is "Disabled" shall not log messages. A log that is "Enabled" shall log
messages. Enable or Disable logging by selecting the corresponding line on the
pulldown entry field.
• Severity Filter -
A log records messages equal to or above a configured severity threshold. Select
the severity option by selecting the corresponding line on the pulldown entry field.
These severity levels have been enumerated below:
-
Emergency (0)
: system is unusable
-
Alert (1)
: action must be taken immediately
-
Critical (2)
: critical conditions
-
Error (3)
: error conditions
-
Warning (4)
: warning conditions
-
Notice(5)
: normal but significant conditions
-
Informational(6)
: informational messages
-
Debug(7)
: debug-level messages
4.2.5.6 Hosts Configuration
Figure 4-2-22 Host Configuration