PLANET WGS3-24240 - Manual (Page 121)

User’s Manual of WGS3-24000 / WGS3-24240
121
included in this group.
• Slot.Port(s) Select the interface(s) you want to be included in the group. Note that a given
interface can only belong to one group for a given protocol. If you have already
added interface 0.1 to a group for IP, you cannot add it to another group that also
includes IP, although you could add it to a new group for IPX.
4.3.2.2 Protocol-based VLAN Summary
Object Description
• Group Name - The name associated with the group. Group names can be up to 16 characters
long. The maximum number of groups allowed is 128.
• Group ID - The number used to identify the group. It was automatically assigned when you
created the group.
• Protocol(s) - The protocol(s) that belongs to the group. There are three configurable protocols:
IP, IPX, ARP.
• IP - IP is a network layer protocol that provides a connectionless service for the
delivery of data.
• ARP - Address Resolution Protocol (ARP) is a low-level protocol that dynamically maps
network layer addresses to physical medium access control (MAC) addresses
• IPX - The Internetwork Packet Exchange (IPX) is a connectionless datagram
Network-layer protocol that forwards data over a network.
• VLAN - The VLAN ID associated with the group.
• Slot.Port(s) - The interfaces associated with the group.
Figure 4-3-7 Protocol-based VLAN Summary