PLANET WGS3-24240 - Manual (Page 537)

User’s Manual of WGS3-24000 / WGS3-24240
537
▫ Format ip dvmrp trapflags
▫ Mode Global Config
no ip dvmrp trapflags
This command disables the DVMRP trap mode.
▫ Format no ip dvmrp trapflags
▫ Mode Global Config
13.2.4 show ip dvmrp
This command displays the system-wide information for DVMRP.
▫ Format show ip dvmrp
▫ Modes Privileged EXEC User EXEC
Admin Mode This field indicates whether DVMRP is enabled or disabled. This is a configured value.
Version String This field indicates the version of DVMRP being used.
Number of Routes This field indicates the number of routes in the DVMRP routing table.
Reachable Routes This field indicates the number of entries in the routing table with non-infinite metrics.
The following fields are displayed for each interface.
Unit/Slot/Port Valid unit, slot and port number separated by forward slashes.
Interface Mode This field indicates the mode of this interface.
Possible values are Enabled and Disabled.
State This field indicates the current state of DVMRP on this interface.
Possible values are Operational or Non-Operational.
13.2.5 show ip dvmrp interface
This command displays the interface information for DVMRP on the specified interface.
▫ Format show ip dvmrp interface <unit/slot/port>
▫ Modes Privileged EXEC User EXEC
Interface Mode This field indicates whether DVMRP is enabled or disabled on the specified interface. This