PLANET WGS3-24240 - Manual (Page 333)

User’s Manual of WGS3-24000 / WGS3-24240
333
4.7.4 Mdebug
4.7.4.1 Mrinfo Run
Use this screen to initiate an mrinfo command. You can use the mrinfo command to find out information about neighboring
multicast routers. While you initiate the query using this screen, the results are displayed on the Mrinfo Show screen.
Figure 4-6-68 Mrinfo Run
Configurable Data
Object Description
• Router Interface Enter the IP address of the router interface for which you want to see the
neighbor router information. If you do not enter an address the router will query
itself.
• Submit button Initiate the mrinfo command on the router. If the mrinfo command completes
successfully the browser will display the Mrinfo Show screen. If the mrinfo
command fails, you will see the Mrinfo Run screen again.