PLANET WGS3-24240 User Manual

Page 84

Advertising
background image

User’s Manual of WGS3-24000 / WGS3-24240

84

• Packets Transmitted

1523-2047 Octets

The total number of packets (including bad packets) received that were between

1523 and 2047 octets in length inclusive (excluding framing bits but including

FCS octets).

• Packets Transmitted

2048-4095 Octets

The total number of packets (including bad packets) received that were between

2048 and 4095 octets in length inclusive (excluding framing bits but including

FCS octets).

• Packets Transmitted

4096-9216 Octets

The total number of packets (including bad packets) received that were between

4096 and 9216 octets in length inclusive (excluding framing bits but including

FCS octets).

• Maximum Frame Size

The maximum Ethernet frame size the interface supports or is configured,

including Ethernet header, CRC, and payload. (1518 to 1600). The default

maximum frame size is 1518.

• Total Packets

Transmitted

Successfully

The number of frames that have been transmitted by this port to its segment.

• Unicast Packets

Transmitted

The total number of packets that higher-level protocols requested be transmitted

to a subnetwork-unicast address, including those that were discarded or not sent.

• Multicast Packets

Transmitted

The total number of packets that higher-level protocols requested be transmitted

to a Multicast address, including those that were discarded or not sent.

• Broadcast Packets

Transmitted

The total number of packets that higher-level protocols requested be transmitted

to the Broadcast address, including those that were discarded or not sent.

• Total Transmit Errors

The sum of Single, Multiple, and Excessive Collisions.

• Tx FCS Errors

The total number of packets transmitted that had a length (excluding framing bits,

but including FCS octets) of between 64 and 1518 octets, inclusive, but had a

bad Frame Check Sequence (FCS) with an integral number of octets

• Tx Oversized

The total number of frames that exceeded the max permitted frame size. This

counter has a max increment rate of 815 counts per sec at 10 Mb/s.

• Underrun Errors

The total number of frames discarded because the transmit FIFO buffer became

empty during frame transmission.

• Total Transmit Packets

Discarded

The sum of single collision frames discarded, multiple collision frames discarded,

and excessive frames discarded.

• Single Collision

Frames

A count of the number of successfully transmitted frames on a particular interface

for which transmission is inhibited by exactly one collision.

• Multiple Collision

Frames

A count of the number of successfully transmitted frames on a particular interface

for which transmission is inhibited by more than one collision.

• Excessive Collision

Frames

A count of frames for which transmission on a particular interface fails due to

excessive collisions.

• Port Membership

Discards

The number of frames discarded on egress for this port due to egress filtering

being enabled.

Advertising
This manual is related to the following products: