PLANET WGS3-24240 - Manual (Page 348)

User’s Manual of WGS3-24000 / WGS3-24240
348
• Hello Interval Enter the time in seconds between the transmission of which PIM Hello
messages on this interface. The valid values are from (10 to 3600 secs) . The
default value is 30.
• CBSR Preference Enter the preference value for the local interface as a candidate bootstrap router.
The value of -1 is used to indicate that the local interface is not a candidate BSR
interface. The valid values are from (-1 to 255) The default value is 0.
• CBSR Hash Mask
Length
Enter the CBSR hash mask length to be advertised in bootstrap messages if this
interface is elected as the bootstrap router. This hash mask length will be used in
the hash algorithm for selecting the RP for a particular group. The valid values
are from (0 to 32). The default value is 30.
• CRP Preference Enter the preference value for the local interface as a candidate bootstrap router.
The value of -1 is used to indicate that the local interface is not a candidate BSR
interface. The valid values are from (-1 to 255). The default value is 0.
• Submit button Send the updated configuration to the router. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a
save is performed.
4.7.6.4 PIM-SM Interface Summary
Figure 4-6-81 PIM-SM Interface Summary