PLANET WGS3-24240 - Manual (Page 557)

User’s Manual of WGS3-24000 / WGS3-24240
557
13.5.12 show ip pimsm rphash
This command displays the RP router that will be selected from the set of active RP routers. The RP router, for the group, is
selected by using the hash algorithm defined in RFC 2362.
▫ Format show ip pimsm rphash <groupaddress>
▫ Mode Privileged EXEC and User EXE
CRP IP Address This field displays the IP address of the RP.
Group Mask This field displays the group mask for the group address.
13.5.13 show ip pimsm staticrp
This command displays the static RP information for the PIM-SM router.
▫ Format show ip pimsm staticrp
▫ Mode Privileged EXEC and User EXE
CRP IP Address This field displays the IP address of the RP.
Group Address This field displays the group address supported by the RP.
Group Mask This field displays the group mask for the group address..
13.5.14 show ip pimsm
This command displays the system-wide information for PIM-SM.
▫ Format show ip pimsm
▫ Mode Privileged EXEC and User EXEC
PIM-SM Admin Mode This field indicates whether PIM-SM is enabled or disabled. This is a configured value.
Join/Prune Interval (secs) This field shows the interval at which periodic PIM-SM Join/Prune messages are to be
sent. This is a configured value.
Data Threshold Rate (K
bits/sec)
This field shows the data threshold rate for the PIM-SM router. This is a configured value.
Register Threshold Rate
(K bits/sec)
This field indicates the threshold rate for the RP router to switch to the shortest path. This
is a configured value.