PLANET WGS3-24240 - Manual (Page 118)

User’s Manual of WGS3-24000 / WGS3-24240
118
4.3.1.4 VLAN Port Summary
This page shows the configured VLAN parameters.
Figure 4-3-4 VLAN Port Summary
Object Description
• Slot.Port The interface.
• Port VLAN ID The VLAN ID that this port will assign to untagged frames or priority tagged
frames received on this port.
• Acceptable Frame
Types
Specifies the types of frames that may be received on this port. The options are
'VLAN only' and 'Admit All'. When set to 'VLAN only', untagged frames or
priority tagged frames received on this port are discarded. When set to 'Admit
All', untagged frames or priority tagged frames received on this port are accepted
and assigned the value of the Port VLAN ID for this port. With either option,
VLAN tagged frames are forwarded in accordance to the 802.1Q VLAN
specification.
• Ingress Filtering When enabled, the frame is discarded if this port is not a member of the VLAN
with which this frame is associated. In a tagged frame, the VLAN is identified by
the VLAN ID in the tag. In an untagged frame, the VLAN is the Port VLAN ID
specified for the port that received this frame. When disabled, all frames are
forwarded in accordance with the 802.1Q VLAN bridge specification. The factory
default is disabled.