PLANET WGS3-24240 User Manual
Page 342
User’s Manual of WGS3-24000 / WGS3-24240
342
Selection Criteria
Object
Description
• Slot/Port
Select the Slot and port for which data is to be displayed or configured. Slot 0 is
the base unit. You must have configured at least one router interface before
configuring or displaying data for a PIM-DM interface, otherwise an error
message will be displayed.
Configurable Data
Object
Description
• Interface Mode
Select enable or disable from the pulldown menu to set the administrative status
of PIM-DM for the selected interface. The default is disable.
• Hello Interval
Enter the number of seconds between PIM hello messages transmitted from the
selected interface. The default value is 30. Valid values are from (10 to 3600) .
• Submit button
Send the updated configuration to the router. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a
save is performed.