8 macfilter adddest all, 9 macfilter addsrc, 10 macfilter addsrc all – PLANET WGS3-24240 User Manual
Page 391
User’s Manual of WGS3-24000 / WGS3-24240
391
8.6.8 macfilter adddest all
This command adds all interfaces to the destination filter set for the MAC filter with the given <macaddr> and VLAN of <vlanid>.
The <macaddr> parameter must be specified as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The <vlanid> parameter must identify a valid VLAN.
▫
Format macfilter adddest all <macaddr> <vlanid>
▫
Mode
Global Config
8.6.8.1 no macfilter adddest all
This command removes all ports from the destination filter set for the MAC filter with the given <macaddr> and VLAN of
<vlanid>. The <macaddr> parameter must be specified as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The <vlanid> parameter must identify a valid VLAN.
▫
Format no macfilter adddest all <macaddr> <vlanid>
▫
Mode
Global Config
8.6.9 macfilter addsrc
This command adds the interface to the source filter set for the MAC filter with the MAC address of <macaddr> and VLAN of
<vlanid>. The <macaddr> parameter must be specified as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The <vlanid> parameter must identify a valid VLAN.
▫
Format
macfilter addsrc <macaddr> <vlanid>
▫
Mode
Interface Config
8.6.9.1 no macfilter addsrc
This command removes a port from the source filter set for the MAC filter with the MAC address of <macaddr> and VLAN of
<vlanid>. The <macaddr> parameter must be specified as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The <vlanid> parameter must identify a valid VLAN.
▫
Format no macfilter addsrc <macaddr> <vlanid>
▫
Mode
Interface Config
8.6.10 macfilter addsrc all
This command adds all interfaces to the source filter set for the MAC filter with the MAC addressf <macaddr> and <vlanid>. The
<macaddr> parameter must be specified as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The <vlanid> parameter must identify a valid VLAN.
▫
Format
macfilter addsrc all <macaddr> <vlanid>
▫
Mode
Global Config
8.6.10.1 no macfilter addsrc all
This command removes all interfaces to the source filter set for the MAC filter with the MAC address of <macaddr> and VLAN of