PLANET WGS3-24240 User Manual
Page 97
User’s Manual of WGS3-24000 / WGS3-24240
97
"Create" in the Drop Down list against Pool Name*.Specifies the Name of the
Pool to be created. Pool Name can be upto 31 characters in length.
• Type of Binding
Specifies the type of binding for the pool.
• Unallocated
• Dynamic
• Manual
• Network Number
Specifies the subnet number for a DHCP address of a dynamic pool.
• Network Mask
Specifies the subnet number for a DHCP address of a dynamic pool. Either
Network Mask or Prefix Length can be configured to specify the subnet mask but
not both.
• Prefix Length
Specifies the subnet number for a DHCP address of a dynamic pool. Either
Network Mask or Prefix Length can be configured to specify the subnet mask but
not both.
Valid Range is (0 to 32)
• Client Name
Specifies the Client Name for DHCP manual Pool.
• Hardware Address
Specifies the MAC address of the hardware platform of the DHCP client.
• Hardware Address
Type
Specifies the protocol of the hardware platform of the DHCP client. Valid types
are ethernet and ieee802. Default value is ethernet.
• Client ID
Specifies the Client Identifier for DHCP manual Pool.
• Host Number
Specifies the IP address for a manual binding to a DHCP client. Host can be set
only if at least one among of Client Identifier or Hardware Address is specified.
Deleting Host would delete Client Name, Client ID, and Hardware Address for the
Manual Pool and set the Pool Type to Unallocated.
• Host Mask
Specifies the subnet mask for a manual binding to a DHCP client. Either Host
Mask or Prefix Length can be configured to specify the subnet mask but not both.
• Prefix Length
Specifies the subnet mask for a manual binding to a DHCP client. Either Host
Mask or Prefix Length can be configured to specify the subnet mask but not both.
Valid Range is (0 to 32)
• Lease Time
Can be selected as "Infinite" to specify lease time as Infinite or "Specified
Duration" to enter a specific lease period. In case of dynamic binding infinite
implies a lease period of 60 days and In case of manual binding infinite implies
indefinite lease period.
Default Value is "Specified Duration".
• Days
Specifies the Number of Days of Lease Period. This field appears only if the user
has specified "Specified Duration" as the Lease time.
Default Value is 1. Valid Range is (0 to 59)
• Hours
Specifies the Number of Hours of Lease Period. This field appears only if the
user has specified "Specified Duration" as the Lease time.
Valid Range is (0 to 1439)