PLANET WGS3-24240 User Manual
Page 347
User’s Manual of WGS3-24000 / WGS3-24240
347
Non-Configurable Data
Object
Description
• PIMSM Admin Mode
The administrative status of PIM-SM in the router: either enable or disable.
• Join/Prune Interval
The interval between the transmission of PIM-SM Join/Prune messages.
• Data Threshold Rate
The minimum source data rate in K bits/second above which the last-hop router
will switch to a source-specific shortest path tree.
• Register Threshold
Rate
The minimum source data rate in K bits/second above which the Rendezvous
Point router will switch to a source-specific shortest path tree.
• Refresh button
Refresh the data on the screen with the present state of the data in the router.
4.7.6.3 PIM-SM Interface Configuration
Figure 4-6-80 PIM-SM Interface Configuration
Selection Criteria
Object
Description
• Slot/Port
Select the slot and port for which data is to be displayed or configured. Slot 0 is
the base unit.
Configurable Data
Object
Description
• Mode
Select enable or disable from the pulldown menu to set the administrative status
of PIM-SM in the router. The default is disable.