PLANET WGS3-24240 User Manual
Page 527
User’s Manual of WGS3-24000 / WGS3-24240
527
Interface
Valid slot and port number separated by forward slashes. This is a configured value.
IP Address
The IP source address used by the specified RIP interface. This is a configured value.
Send version
The RIP version(s) used when sending updates on the specified interface.
The types are none, RIP-1, RIP-1c, RIP-2. This is a configured value.
Receive version
The RIP version(s) allowed when receiving updates from the specified interface.
The types are none, RIP-1, RIP-2, Both. This is a configured value.
Both RIP Admin Mode
RIP administrative mode of router RIP operation; enable activates, disable de-activates it.
This is a configured value.
Link State
Indicates whether the RIP interface is up or down. This is a configured value.
Authentication Type
The RIP Authentication Type for the specified interface.
The types are none, simple, and encrypt. This is a configured value.
Default Metric
A number which represents the metric used for default routes in RIP updates originated on
the specified interface. This is a configured value.
The following information will be invalid if the link state is down.
Bad Packets Received
The number of RIP response packets received by the RIP process which were
subsequently discarded for any reason.
Bad Routes Received
The number of routes contained in valid RIP packets that were ignored for any reason.
Updates Sent
The number of triggered RIP updates actually sent on this interface.