PLANET WGS3-24240 - Manual (Page 194)

User’s Manual of WGS3-24000 / WGS3-24240
194
you must remove the current existing wireless network from your preferred connection first, and add it in again.
„ Configure Sample: EAP-MD5 Authentication
1. Go to Start > Control Panel, double-click on “Network Connections”.
2. Right-click on the Local Network Connection.
3. Click “Properties” to open up the Properties setting window.
4. Select “Authentication” tab.
5. Select “Enable network access control using IEEE 802.1X” to enable 802.1x authentication.