PLANET WGS3-24240 - Manual (Page 48)

User’s Manual of WGS3-24000 / WGS3-24240
48
4.2.3.4 Telnet Session
Figure 4-2-6 Telnet Session Configuration
This page includes the following fields:
Configurable Data
Object Description
• Telnet Session
Timeout (minutes)
Specify how many minutes of inactivity should occur on a telnet session before
the session is logged off. You may enter any number from 1 to 160.
The factory default is 5.
• Maximum Number of
Telnet Sessions
Use the pulldown menu to select how many simultaneous telnet sessions will be
allowed. The maximum is 5, which is also the factory default.
• Allow New Telnet
Sessions
If you set this to no, new telnet sessions will not be allowed.
The factory default is Yes.
4.2.3.5 Outbound Telnet Client Configuration
Figure 4-2-7 OutboundTelnet Client Configuration
This page includes the following fields: