PLANET WGS3-24240 - Manual (Page 485)

User’s Manual of WGS3-24000 / WGS3-24240
485
12.3.3 ip irdp holdtime
This command configures the value, in seconds, of the holdtime field of the router advertisement sent from this interface. The
holdtime range is the value of <maxadvertinterval> to 9000 seconds.
▫ Default 3 * maxinterval
▫ Format ip irdp holdtime <maxadvertinterval-9000>
▫ Mode Interface Config
12.3.3.1 no ip irdp holdtime
This command configures the default value, in seconds, of the holdtime field of the router advertisement sent from this interface.
▫ Format no ip irdp holdtime
▫ Mode Interface Config
12.3.4 ip irdp maxadvertinterval
This command configures the maximum time, in seconds, allowed between sending router advertisements from the interface.
The range for maxadvertinterval is 4 to 1800 seconds.
▫ Default 600
▫ Format ip irdp maxadvertinterval <4-1800>
▫ Mode Interface Config
12.3.4.1 no ip irdp maxadvertinterval
This command configures the default maximum time, in seconds.
▫ Format no ip irdp maxadvertinterval
▫ Mode Interface Config
12.3.5 ip irdp minadvertinterval
This command configures the minimum time, in seconds, allowed between sending router advertisements from the interface.
The range for minadvertinterval is three to the value of maxadvertinterval.
▫ Default 0.75 * maxadvertinterval
▫ Format ip irdp minadvertinterval <3-maxadvertinterval>
▫ Mode Interface Config
12.3.5.1 no ip irdp minadvertinterval
This command sets the default minimum time to the default.
▫ Format no ip irdp minadvertinterval
▫ Mode Interface Config