PLANET WGS3-24240 - Manual (Page 296)

User’s Manual of WGS3-24000 / WGS3-24240
296
• Submit button Send the updated configuration to the switch. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a
save is performed.
4.6.7.2 BOOTP/DHCP Relay Agent Status
Figure 4-6-40 BOOTP/DHCP Relay Agent Status
Non-Configurable Data
Object Description
• Maximum Hop Count The maximum number of Hops a client request can go without being discarded.
• Server IP Address IP address of the BOOTP/DHCP server or the IP address of the next
BOOTP/DHCP Relay Agent.
• Admin Mode Administrative mode of the relay. When you select 'enable' BOOTP/DHCP
requests will be forwarded to the IP address you entered in the 'Server IP
address' field.
• Minimum Wait Time The Minimum time in seconds. This value will be compared to the time stamp in
the client's request packets, which should represent the time since the client was
powered up. Packets will only be forwarded when the time stamp exceeds the
minimum wait time.
• Circuit Id Option Mode This is the Relay agent option which can be either enabled or disabled. When
enabled Relay Agent options will be added to requests before they are forwarded
to the server and removed from replies before they are forwarded to clients.
• Requests Received The total number of BOOTP/DHCP requests received from all clients since the
last time the switch was reset.