PLANET WGS3-24240 - Manual (Page 522)

User’s Manual of WGS3-24000 / WGS3-24240
522
▫ Default disabled
▫ Format auto-summary
▫ Mode Router RIP Config
no auto-summary
This command disables the RIP auto-summarization mode.
▫ Format no auto-summary
▫ Mode Router RIP Config
12.8.5 default-information originate (RIP)
This command is used to control the advertisement of default routes.
▫ Format default-information originate
▫ Mode Router RIP Config
no default-information originate (RIP)
This command is used to control the advertisement of default routes.
▫ Format no default-information originate
▫ Mode Router RIP Config
12.8.6 default-metric (RIP)
This command is used to set a default for the metric of distributed routes.
▫ Format default-metric <0-15>
▫ Mode Router RIP Config
no default-metric (RIP)
This command is used to reset the default metric of distributed routes to its default value.
▫ Format no default-metric
▫ Mode Router RIP Config
12.8.7 distance rip
This command sets the route preference value of RIP in the router. Lower route preference values are preferred when
determining the best route. A route with a preference of 255 cannot be used to forward traffic.
▫ Default 15
▫ Format distance rip <1-255>
▫ Mode Router RIP Config