PLANET WGS3-24240 - Manual (Page 147)

User’s Manual of WGS3-24000 / WGS3-24240
147
• Participation For each port specify whether it is to be included as a member of this Port
Channel or not. There can be a maximum of 8 ports assigned to a Port Channel.
The default is Exclude.
Non-Configurable Data
Object Description
• Slot.Port Slot.Port identification of the Port Channel being configured. This field will not
appear when a new Port Channel is being created.
• Link Status Indicates whether the Link is up or down.
• Port Channel Members List of members of the Port Channel in slot.port form.
• Membership Conflicts Shows ports that are already members of other Port Channels. A port may only
be a member of one Port Channel at a time. If the entry is blank, it is not currently
a member of any Port Channel.
4.3.6.3 Port Channel Status
Use this page to display the current Port Channel Status.
Figure 4-3-29 Port Channel Status
The itmes as below:
Object Description
• Port Channel - The slot.port identification of the Port Channel.
• Port Channel Name - The name of the Port Channel
• Port Channel Type - The type of this Port Channel.
• Static: Static Port Trunk
• Dynamic: IEEE 802.3ad LACP
Admin Mode - The Administrative Mode of the Port Channel, enable or disable
Link Status - Indicates whether the Link is up or down.