PLANET WGS3-24240 - Manual (Page 39)

User’s Manual of WGS3-24000 / WGS3-24240
39
Figure 4-1-3 Default main page
Now, you can use the Web management interface to continue the switch management or manage the WGS3 Layer 3 Switch by
Web interface.
1. It is recommended to use Internet Explore 6.0 or above to access WGS3 Layer 3 Switch.
2. The changed IP address take effect immediately after click on the OK button, you need to
use the new IP address to access the Web interface.
3. The changed IP address remains the original after reboot the switch unless the
configuration is saved. To save the changed IP address, please move to System \ System
Utility \ Saving Parameters menu.