PLANET WGS3-24240 - Manual (Page 249)

User’s Manual of WGS3-24000 / WGS3-24240
249
Configurable Data
Object Description
• RIP Admin Mode Select enable or disable from the pulldown menu. If you select enable RIP will be
enabled for the switch. The default is disable.
• Split Horizon Mode Select none, simple or poison reverse from the pulldown menu. Split horizon is a
technique for avoiding problems caused by including routes in updates sent to
the router from which the route was originally learned. The options are:
•
None - no special processing for this case.
• Simple - a route will not be included in updates sent to the router from
which it was learned.
• Poisoned reverse - a route will be included in updates sent to the
router from which it was learned, but the metric will be set to infinity.
The default is simple.
• Auto Summary Mode Select enable or disable from the pulldown menu. If you select enable groups of
adjacent routes will be summarized into single entries, in order to reduce the total
number of entries The default is enable.
• Host Routes Select
Mode
Select enable or disable from the pulldown menu. If you select enable the router
will be accept host routes. The default is enable.
• Default Information
Originate
Enable or Disable Default Route Advertise.
• Default Metric Sets a default for the metric of redistributed routes.This field displays the default
metric if one has already been set or blank if not configured earlier. The valid
values are (1 to 15)
Non-Configurable Data
Object Description
• Global Route Changes The number of route changes made to the IP Route Database by RIP. This does
not include the refresh of a route's age.
• Global queries The number of responses sent to RIP queries from other systems.
• Submit button Send the updated configuration to the switch. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a
save is performed.