PLANET WGS3-24240 - Manual (Page 65)

User’s Manual of WGS3-24000 / WGS3-24240
65
Format of the messages
。 <15>Aug 24 05:34:05 STK0 MSTP[2110]: mspt_api.c(318) 237 %% Interface 12 transitioned to root state on
message age timer expiry
-The above example indicates a user-level message (1) with severity 7 (debug) on a system that is not stack and
generated by component MSTP running in thread id 2110 on Aug 24 05:34:05 by line 318 of file mstp_api.c. This
is the 237th message logged. Messages logged to a collector or relay via syslog have an identical format to the
above message.
Object Description
• Refresh button Refresh the page with the latest log entries.
4.2.5.9 Syslog Configuration
Figure 4-2-25 Syslog Configuration
Configurable Data
Object Description
• Admin Status For Enabling and Disabling logging to configured syslog hosts. Setting this to
disable stops logging to all syslog hosts. Disable means no messages will be
sent to any collector/relay. Enable means messages will be sent to configured
collector/relays using the values configured for each collector/relay.
Enable/Disable the operation of the syslog function by selecting the
corresponding line on the pulldown entry field.
• Local UDP Port This is the port on the local host from which syslog messages are sent. The
default port is XXX. The default port is 514. Specify the local port in the text field.
• Submit button Update the switch with the values you entered.
• Refresh button Refetch the database and display it again starting with the first entry in the table.