PLANET WGS3-24240 - Manual (Page 164)

User’s Manual of WGS3-24000 / WGS3-24240
164
4.3.8.4 Spanning Tree CST Port Configuration/Status
Figure 4-3-36 Spanning Tree CST Port Configuration/Status
Selection Criteria
Object Description
• Slot/Port Selects one of the physical or port channel interfaces associated with VLANs
associated with the CST.
Configurable Data
Object Description
• Port Priority The priority for a particular port within the CST. The port priority is set in multiples
of 16. For example if the priority is attempted to be set to any value between 0
and 15, it will be set to 0. If it is tried to be set to any value between 16 and
(2*16-1) it will be set to 16 and so on.
• Admin Edge Port Specifies if the specified port is an Edge Port within the CIST. It takes a value of
TRUE or FALSE, where the default value is FALSE.
• Port Path Cost Set the Path Cost to a new value for the specified port in the common and
internal spanning tree. It takes a value in the range of 1 to 200000000 .
• Hello Timer Configure the value of the parameter for the CST.
• External Port Path
Cost
Set the External Path Cost to a new value for the specified port in the spanning
tree. It takes a value in the range of 1 to 200000000 .
• Port Mode Spanning Tree Protocol Administrative Mode associated with the port or port
channel. The possible values are Enable or Disable.
Non-Configurable Data