PLANET WGS3-24240 - Manual (Page 491)

User’s Manual of WGS3-24000 / WGS3-24240
491
Zero Priority Packets Sent Represents the total number of VRRP packets sent by the virtual router with a priority of
'0'.
Invalid Type Packets
Received
Represents the total number of VRRP packets received by the virtual router with invalid
'type' field.
Address List Errors Represents the total number of VRRP packets received for which address list does not
match the locally configured list for the virtual router.
Invalid Authentication
Type
Represents the total number of VRRP packets received with unknown authentication type.
Authentication Type
Mismatch
Represents the total number of VRRP advertisements received for which 'auth type' not
equal to locally configured one for this virtual router.
Packet Length Errors Represents the total number of VRRP packets received with packet length less than length
of VRRP header.
12.5.10 show ip vrrp
This command displays whether VRRP functionality is enabled or disabled on the switch. It also displays some global
parameters which are required for monitoring.
This command takes no options.
▫ Format show ip vrrp
▫ Modes Privileged EXEC
User EXEC
VRRP Admin Mode Displays the administrative mode for VRRP functionality on the switch.
Router Checksum Errors Represents the total number of VRRP packets received with an invalid VRRP checksum
value.
Router Version Errors Represents the total number of VRRP packets received with Unknown or unsupported
version number.
Router VRID Errors Represents the total number of VRRP packets received with invalid VRID for this virtual
router.
12.5.11 show ip vrrp interface
This command displays all configuration information and VRRP router statistics of a virtual router configured on a specific
interface.
▫ Format show ip vrrp interface <slot/port> <vrid>
▫ Modes Privileged EXEC
User EXEC
IP Address This field represents the configured IP Address for the Virtual router.
VMAC address Represents the VMAC address of the specified router.