PLANET WGS3-24240 - Manual (Page 376)

User’s Manual of WGS3-24000 / WGS3-24240
376
8.4 LAG/Port-Channel (802.3ad) Commands
8.4.1 port-channel staticcapability
This command enables the support of port-channels (static link aggregations - LAGs) on the device. By default, the static
capability for all port-channels is disabled.
▫ Default Disabled
▫ Format port-channel staticcapability
▫ Mode Global Config
8.4.1.1 no port-channel staticcapability
This command disables the support of static port-channels (link aggregations - LAGs) on the device.
▫ Default Disabled
▫ Format no port-channel staticcapability
▫ Mode Global Config
8.4.2 show port-channel brief
This command displays the static capability of all port-channels (LAGs) on the device as well as a summary of individual
port-channels.
▫ Format show port-channel brief
▫ Mode Privileged EXEC and User EXEC
Static Capability - This field displays whether or not the device has static capability enabled.
For each port-channel the following information is displayed:
▫ Name - This field displays the name of the port-channel.
▫ Link State - This field indicates whether the link is up or down.
▫ Mbr Ports - This field lists the ports that are members of this port-channel, in slot/port notation.
▫ Active Ports - This field lists the ports that are actively participating in this port-channel.
8.5 Management Commands
These commands manage the switch and show current management settings.
8.5.1 bridge aging-time
This command configures the forwarding database address aging timeout in seconds. In an IVL system, the [fdbid/all]
parameter is required.
▫ Default 300
▫ Format bridge aging-time <10-1,000,000> [fdbid | all]
▫ Mode Global Config
Seconds - The <seconds> parameter must be within the range of 10 to 1,000,000 seconds.
Forwarding Database ID - Fdbid (Forwarding database ID) indicates which forwarding database's aging timeout is being
configured. All is used to configure all forwarding database's agetime.