PLANET WGS3-24240 - Manual (Page 419)

User’s Manual of WGS3-24000 / WGS3-24240
419
▫ Default no encryption
▫ Format users snmpv3 encryption <username> {none | des [key]}
▫ Mode Global Config
8.7.8.1 no users snmpv3 encryption
This command sets the encryption protocol to none. The <username> is the login user name for which the specified encryption
protocol will be used.
▫ Format no users snmpv3 encryption <username>
▫ Mode Global Config
8.8 System Utilities
This section describes system utilities.
8.8.1 clear config
This command resets the configuration to the factory defaults without powering off the switch. The switch is automatically reset
when this command is processed. You are prompted to confirm that the reset should proceed.
▫ Format clear config
▫ Mode Privileged EXEC
8.8.2 clear counters
This command clears the stats for a specified <slot/port> or for all the ports or for the entire switchbased upon the argument.
Format clear counters [{<slot/port> | all}]
Mode Privileged EXEC
8.8.3 clear igmpsnooping
This command clears the tables managed by the IGMP Snooping function and will attempt to delete these entries from the
Multicast Forwarding Database.
▫ Format clear igmpsnooping
▫ Mode Privileged EXEC
8.8.4 clear pass
This command resets all user passwords to the factory defaults without powering off the switch. You are prompted to confirm
that the password reset should proceed.
▫ Format clear pass
▫ Mode Privileged EXEC
8.8.5 clear port-channel
This command clears all port-channels (LAGs).
▫ Format clear port-channel
▫ Mode Privileged EXEC