PLANET WGS3-24240 - Manual (Page 123)

User’s Manual of WGS3-24000 / WGS3-24240
123
4.3.3.2 Port Security Interface Configuration
Figure 4-3-9 Port Security Interface Configuration
Selection Criteria
Object Description
• Unit/Slot/Port Selects the interface to be configured.
Configurable Data
Object Description
• Port Security Enables or disables the Port Security feature for the selected interface.
• Maximum Dynamic
MAC Addresses
allowed
Sets the maximum number of dynamically learned MAC addresses on the
selected interface.
• Add a static MAC
address
Adds a MAC address to the list of statically locked MAC addresses for the
selected interface.
• VLAN ID Adds a corresponding VLAN ID for the MAC Address being added to the list of
statically locked MAC addresses for the selected interface.
• Maximum static MAC
Addresses allowed
Sets the maximum number of statically locked MAC addresses on the selected
interface.
• Enable violation traps Enables or disables the sending of new violation traps designating when a packet
with a disallowed MAC address is received on a locked port.
• Submit button Applies the new configuration and causes the changes to take effect. These
changes will not be retained across a power cycle unless a save configuration is