44 show mac-address-table stats, 45 show monitor, 46 show port – PLANET WGS3-24240 User Manual

Page 404

Advertising
background image

User’s Manual of WGS3-24000 / WGS3-24240

404

▫

Mac Address - An unicast MAC address for which the switch has forwarding and or filtering information. The format is 6

or 8 two-digit hexadecimal numbers that are separated by colons, for example 01:23:45:67:89:AB. In an IVL system the

MAC address will be displayed as 8 bytes.

▫

Type - This displays the type of the entry. Static entries are those that are configured by the end user. Dynamic entries are

added to the table as a result of a learning process or protocol.

▫

Description - The text description of this multicast table entry.

▫

Interfaces - The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).

8.6.44 show mac-address-table stats

This command displays the Multicast Forwarding Database (MFDB) statistics.

▫

Format show mac-address-table stats

▫

Mode

Privileged EXEC

▫

Total Entries - This displays the total number of entries that can possibly be in the Multicast Forwarding Database table.

▫

Most MFDB Entries Ever Used - This displays the largest number of entries that have been present in the Multicast

Forwarding Database table. This value is also known as the MFDB high-water mark.

▫

Current Entries - This displays the current number of entries in the Multicast Forwarding Database table.

8.6.45 show monitor

This command displays the Port monitoring information for the system.

▫

Format show monitor

▫

Mode

Privileged EXEC

▫

Port Monitor Mode indicates whether the Port Monitoring feature is enabled or disabled. The possible values are enable

and disable.

▫

Probe Port slot/port is the slot/port that is configured as the probe port. If this value has not been configured, 'Not

Configured' will be displayed.

▫

Monitored Port slot/port is the slot/port that is configured as the monitored port. If this value has not been configured,

'Not Configured' will be displayed.

8.6.46 show port

This command displays port information.

▫

Format show port {<slot/port> | all}

▫

Mode

Privileged EXEC

▫

slot/port - The physical slot and physical port.

▫

Type - If not blank, this field indicates that this port is a special type of port. The possible values are:

Mon - this port is a monitoring port. Look at the Port Monitoring screens to find out more information.

Lag - this port is a member of a port-channel (LAG).

Probe - this port is a probe port.

Advertising
This manual is related to the following products: