IAI America XSEL-QX User Manual
Page 121
Advertising
![background image](/manuals/350297/121/background.png)
97
Part 1 Installation
(8) When the replacement of system memory backup battery is complete, confirm that the battery is
installed securely and then turn on the controller power.
(9) Revert “Other parameter No. 20, Backup battery installation function type” to the value recorded in
step 2, transfer the setting to the controller, and then perform a flash ROM write.
* Confirm that the flash ROM writing process has completed.
(10) Perform a software reset (restart the controller).
(11) After the controller has restarted, confirm that the SRAM data have been restored.
Advertising
This manual is related to the following products: