IAI America XSEL-QX - Manual (Page 136)

112
Part 3 Controller Data Structure
Note on increased parameters
On controllers with increased memory size (with gateway function), the number of parameters has
been increased.
Number of parameters
Without increased
memory size
With increased
memory size
I/O 400 600
All-axis common 300 400
Axis specific 220 250
Drive 97 97
Encoder 30 30
I/O device 82 82
Other 120 200
Take note of the following points:
* When a parameter file saved in a controller without increased memory size is transferred to a
controller with increased memory size, or when a parameter file saved in a controller with increased
memory size is transferred to a controller without increased memory size, only the parameters
supported by the controller without increased memory size will be transferred, as shown below.
Parameter file saved in
a controller without
increased memory size
Parameter saved in a
controller with
increased memory size
Parameter file saved in
a controller with
increased memory size
Parameter saved in a
controller without
increased memory size
Transfer Transfer
Parameters
supported by
the controller
without
increased
memory size
Parameters
not
supported by
the controller
without
increased
memory size
Parameters
supported by
the controller
without
increased
memory size
Parameters
not
supported by
the controller
without
increased
memory size
These parameters will not
be changed, so change
them manually as
necessary.
Not transferred.
Transferring a parameter file saved in a controller
without increased memory size to a controller with
increased memory size Transferring a parameter file saved in a controller
with increased memory size to a controller without
increased memory size