IAI America XSEL-QX - Manual (Page 132)

108
Part 3 Controller Data Structure
Since the programs, parameters and symbols are read from the flash memory at restart, the data in the
temporary memory will remain the same as the original data before edit unless the edited data are written
to the flash memory.
The controller always operates in accordance with the data in the main CPU memory (excluding the
parameters).
1.2 Controller with Increased Memory Size (with Gateway Function)
(Other parameter No. 20 = 2 (System-memory backup battery installed))
The programs, parameters, symbols and positions are read from the flash memory at restart. The data in
the main CPU memory will remain the same as the original data before edit unless the edited data are
written to the flash memory. The controller always operates in accordance with the data in the main CPU
memory (excluding the parameters).
Data edited on the
PC or teaching
pendant
Data will be retained while the power is
on and cleared upon reset
Data will be retained even after the power is
turned off
PC
software,
TP
Transfer
Transfer
Transfer
Main CPU RAM memory
Programs
Parameters (other than
slave parameters)
Symbols
Positions (X-SEL axis)
(No.10001~20000)
Slave card
parameters
(Variable driver
parameters)
Slave card parameters
(Encoder parameters,
etc.)
Write to flash memory
Write to flash memory
Transfer upon reset
Transfer upon reset
Transfer upon reset
Transfer upon reset
Transfer upon reset
Transfer
Transfer
Main CPU flash memory
Slave card memory
Slave card memory
Battery backup memory
SEL global data (flags,
variables, strings)
Error lists
Write to flash memory
Transfer
Write to flash memory
Slave card parameters
(Fixed driver parameters
and power-supply
parameters)
(Cannot be changed)
Positions (X-SEL axis)
(Nos. 1 to 10000)
Coordinate system data
User-data backup
memory
(Positions (RC axis))