IAI America XSEL-QX - Manual (Page 54)

30
Part 1 Installation
2. Explanation of Codes Displayed on the Panel Window
2.1 Application
Display Priority (*1) Description
1
AC power is cut off (including momentary power failure or drop in power
source voltage).
1 System down level error
2 Writing data to the flash ROM.
3 Emergency stop is being actuated (except during the update mode).
4 Enable switch (deadman switch/safety gate) OFF (except in the update mode)
5 Cold start level error
5 Cold start level error
5 Operation cancellation level error
5 Operation cancellation level error
6 Waiting for a drive source cutoff reset input (except during the update mode).
6
Operation is paused and waiting for a restart signal (except during the update
mode)
7 All servo axes are interlocked (except during the update mode)
8 Message level error
8 Message level error
9 Core update mode
9 Core update is in progress
9 Core update has completed
9 Slave update mode
9 Slave update is in progress
9 Slave update has completed
9
A program is running (last started program). *** indicates the program number.
(Controller with increased memory size (with gateway function))
9
A program is running (last started program). ** indicates the program number.
(Controller with increased memory size)
9 Initialization sequence number
9 Debug mode
9 Ready status (auto mode)
9 Ready status (manual mode)
(*1) The priority increases as the number decreases.