Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 105)

Preface
Advanced Programming Software User Manual
6–14
2. Press
CONFIG OFFLINE
CONFIG
SEARCH
FOR
F2
. Enter the instruction type by doing one of the following:
a. Type in the search string. Enter the instruction type first, followed by a
comma, and then the address. Do not add spaces to the search string. For
example,
xic,b3/0.
b. Press one of the available function keys, described below.
Function Key Description
[F5] Current Instruction Inserts the mnemonic of the instruction the cursor is currently
positioned on in the search/replace field. If an address is
already present in the field, a comma is appended to the
instruction mnemonic prior to the mnemonic being inserted in
the search/replace field.
[F6] Current Operand Inserts the logical address of the first parameter of the
instruction the cursor is currently positioned on in the
search/replace field. If an instruction mnemonic is already
preset in the field, a comma is appended to the instruction
mnemonic prior to the mnemonic being inserted in the
search/replace field.
[F7] Previous String Replaces the contents of the search/replace field with the
previous search pattern. If no previous search pattern is
present in the buffer, the current contents of the search/replace
field is left unchanged.
[F8] Instruction List Brings up the instruction menus and allows you to select the
instructions to search for" or replace with."
3. Press
CONFIG OFFLINE
CONFIG
START
SEARCH
F5
. If no match is found, the cursor position does not change and
the message SEARCH PATTERN NOT FOUND is displayed.