Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 378)

Transferring Program Files
21–5
4. Move the cursor in the right-hand box to EXAMPLE , then press
CONFIG OFFLINE
CONFIG
F1
SEND
BEGIN
.
The Waiting to Send display appears:
Press Control-C to abort
Term. Addr: 0 Emulation: 5/02
ROCKWELL SOFTWARE INCORPORATED
9323 SERIES SOFTWARE
SLC-500 PROGRAM TRANSFER UTILITY
Waiting to Send Program...
File Name : EXAMPLE .ACH
A total of 4 data, 4 program, and 2 force table(s)
20 Words in 4 Data Files, 78 Words in 4 Program Files,
2 Words in 2 Force Tables.
There are 0 undefined data and 0 undefined program file(s).
Notice that the processor emulation parameter automatically changes to display
the currently configured processor type. In this case, an SLC 5/02 processor is
used. Leave this menu displayed while you set up node 3 APS terminal to
receive the program file, or press
[CTRL-C] to abort the procedure.