Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 394)

Transferring Program Files
21–21
9. To transfer the program file to the APS terminal, press
CONFIG OFFLINE
CONFIG
DOWNLOAD
F3
. The
message Download to Processor? will appear. Press either
CONFIG OFFLINE
CONFIG
YES
F2
to continue or
CONFIG OFFLINE
CONFIG
NO
F4
to abort the procedure.
The message Downloading File appears on the HHT display as the file is
transferred to the APS terminal. When the transfer is complete, the APS
terminal displays the following menu:
PROGRAM TRANSFER COMPLETED
Press <ESC> to exit
Term. Addr: 0 Emulation: 5/01
ROCKWELL SOFTWARE INCORPORATED
9323 SERIES SOFTWARE
SLC-500 PROGRAM TRANSFER UTILITY
File Name : EXAMPLE .ACH
A total of 4 data, 4 program, and 2 force table(s)
20 Words in 4 Data Files, 78 Words in 4 Program Files,
2 Words in 2 Force Tables.
There are 0 undefined data and 0 undefined program file(s).
10. This completes the program file transfer procedure. At the APS terminal press
[ESC][ESC][ESC] to return to the main menu.