Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 80)

Creating and Configuring Processor Files
5–13
Deleting a Processor File from the Workspace
Deleting a file from the workspace physically removes it from the memory of the
terminal, but the file resides in the processor’s memory and on the terminal hard
disk.
1. At the main menu press
CONFIG OFFLINE
CONFIG
OFFLINE
PRG/DOC
F3
, then
CONFIG OFFLINE
CONFIG
PROCSSR
FUNCTNS
F1
. The following menu
appears:
F1 F2 F6 F7 F3 F4 F8
CHANGE
PROCSSR
CHANGE
PASSWRD
CREATE
FILE
DELETE
FILE
CHANGE
PR. NAME
CHANGE
FL. NAME
MONITOR
FILE
Press a key, enter file number or file name
offline SLC 5/03 File EXAMPLE
PROGRAM DIRECTORY FOR PROCESSOR: EXAMPLE
F5
CLEAR
MEMORY
F9 F10
DATA
MONITOR
FILE
PROTECT
FILE PROTECTED NAME TYPE SIZE (words)
0 system *
1 reserved *
2 No ladder *
2. Press
CONFIG OFFLINE
CONFIG
CLEAR
MEMORY
F5
, then
CONFIG OFFLINE
CONFIG
YES
F8
to clear the file in the workspace, or
CONFIG OFFLINE
CONFIG
NO
F10
to abort the operation.
3. Press either
CONFIG OFFLINE
CONFIG
RETURN
TO MENU
F3
or
CONFIG OFFLINE
CONFIG
CHANGE
FILE
F4
.