Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 72)

Creating and Configuring Processor Files
5–5
Note that the currently selected processor type in the I/O configuration does not
have to be set to an SLC 5/03 or SLC 5/04 processor for the read I/O
configuration function to be performed. Only the current processor type as
specified by the processor node address in the current online configuration must
be an SLC 5/03 or SLC 5/04 processor.
The status line is updated and the updated processor I/O configuration is
displayed on the screen when the following events occur:
•
the current communication driver is successfully activated
•
the online configuration specifies an SLC 5/03 or SLC 5/04 processor
•
APS successfully attaches to the processor
If the read of the auto configuration from the processor is successful, the
information is stored in the I/O configuration for the current archive file.
If the attempt to read the auto configuration file from the processor, specified by
the current online configuration, fails the message:
ERROR ACCESSING
PROCESSOR I/O CONFIGURATION FILE is displayed.
G Files: If one or more slots are detected as having a G File associated with it
when a read configuration is performed, the message:
G FILES NEED TO
BE INITIALIZED is displayed. To initialize these files, you must first set the
G file size and then modify the G file. Refer to page 5–8 for the screen display
that allows you to access the G file information.
6. Press
CONFIG OFFLINE
CONFIG
MODIFY
SLOT
F5
. This brings up the I/O module selection for slot 1.
Press ENTER to select I/O Module
Enter Module ID Code >
I/O MODULE SELECTION FOR SLOT: 1
ESC exits
CATALOG CARD DESCRIPTION
1746-I*8 8 - Any 8 point Discrete Input Module
1746-I*16 16 - Any 16 point Discrete Input Module
1746-I*32 32 - Any 32 point Discrete Input Module
1746-O*8 8 - Any 8 point Discrete Output Module
1746-O*16 16 - Any 16 point Discrete Output Module
1746-O*32 32 - Any 32 point Discrete Output Module
1746-IA4 4 - Input 100/120 VAC
1746-IA8 8 - Input 100/120 VAC
1746-IA16 16 - Input 100/120 VAC
F2
SELECT
MODULE