Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 293)

Preface
Advanced Programming Software User Manual
15–12
Single Scan
When you enter this mode, “REM SSN” appears on the status line. To use the
Single Scan mode, do the following:
1. Press
CONFIG OFFLINE
CONFIG
SINGLE
SCAN
F4
, then
CONFIG OFFLINE
CONFIG
YES
F8
to confirm your selection. The processor
executes an initialization scan.
2. Press
CONFIG OFFLINE
CONFIG
SINGLE
SCAN
F4
, then
CONFIG OFFLINE
CONFIG
YES
F8
again. The processor scans the program
once.
3. Repeat step 2 to execute subsequent scans.
Continuous Scan
When you enter this mode “REM CSN” appears on the status line. To use the
Continuous Scan mode, do the following:
Press
CONFIG OFFLINE
CONFIG
CONTINU
SCAN
F6
, then
CONFIG OFFLINE
CONFIG
YES
F8
to confirm your selection. The processor
executes an initialization scan and continues scanning.