Preface, Offline config – Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 User Manual
Page 140
Preface
Advanced Programming Software User Manual
7–24
2.
Press
CONFIG
OFFLINE
CONFIG
EDIT
DBASE
F5
and type:
I:1/1
. Press
[ENTER]
and the following display
appears:
Press a key or enter a NEW address or EXISTING symbol
offline
Database Mode: ADDRESS
File EXAMPLE2
F6
MODIFY
SYMBOL
F5
RELATE
TO CMT
F1
DBASE
MODE
Adr Cmt
ADDRESS: I:1/1
SYMBOL:
F7
REMOVE
SYMBOL
INS Cmt
F2
DELETE
ENTRY
Rung Comment Instruction: INS
3.
Using the
[right arrow]
or
[left arrow]
, move the cursor to the
window you want to modify. In this case move the cursor to the address
window. The system highlights the active window with an intensified double
line border.
4.
Do one of the following to select an address:
•
Use the
[up arrow]
or
[down arrow]
and scroll through the
addresses in the database.
•
Type the address, such as
B3/18
and press
[ENTER]
.
Any comments that exist for the address, instruction, or rung are displayed.
5.
Use the displayed function keys to make changes to the comments.