Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 270)

Preface
Advanced Programming Software User Manual
13–20
4. Go to the main menu and press
CONFIG OFFLINE
CONFIG
ONLINE
CONFIG
F2
. Select Full-Duplex.
1747-PIC (DH-485)
1784-KR (DH-485)
1784-KL (DH+ Bridged)
1784-KT (DH+ Bridged)
KF3/KE (Full-Duplex)
Full-Duplex
Half-Duplex Slave
Full-Duplex (Micro)
1784-KL (DH+ Direct)
1784-KT (DH+ Direct)
1784-KT2 (DH+ Direct)
1784-KT2 (DH+ Bridged)
Interchange DH+ Direct
Interchange DH485
Interchange DH+ Bridged
F9
Press a function key, ENTER to select device, ESC or Alt-U to abort
SAVE TO
FILE
F2
DRIVER
CONFIG
ESC exits/Alt-U aborts changes
Select Device
5. Press
CONFIG OFFLINE
CONFIG
DRIVER
CONFIG
F2
. You see:
F1 Port COM1
Current Device Full-Duplex
F4 Source Address 7
F5 Destination Address 8
F7 Device/Modem/Full-Duplex Configuration
F9 Save to File
F9
Press a function key
SAVE TO
FILE
F1
PORT
F2
SELECT
DEVICE
ESC exits/Alt-U aborts changes
ONLINE CONFIGURATION
F7
DEVICE
CONFIG
F4
SOURCE
ADDRESS
F5
DEST
ADDRESS