Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 393)

Preface
Advanced Programming Software User Manual
21–20
7. Access the Who menu by pressing
CONFIG OFFLINE
CONFIG
WHO
F2
. The following display appears
which lists the active nodes on the network. Notice the node 0, APS Xfer .
This indicates that node 0 is waiting to transfer the program file.
Node Addr. Device Max Addr./Owner
***0 APS XFER (31) ***
1 500-20 (31)
2 5/02 (31)
3 APS (31)
4 TERMINAL (31)
Node Addr: 1 Baud Rate: 19200 OFL
DIAGNSTC ATTACH NODE_CFG OWNER
F1 F2 F3 F4 F5
8. At this point, press
CONFIG OFFLINE
CONFIG
ATTACH
F3
. The message Going Online is momentarily
displayed on the HHT. Once the HHT is online the following menu appears:
Program Directory
Programmer Processor
Prog: EXAMPLE Prog: DEFAULT
File: File:
Exec Files: 3 Exec Files: 0
Data Files: 12 Data Files: 0
PROCESSOR FILES CORRUPTED PRG
OFFLINE UPLOAD DWNLOAD MODE CLR_PRC
F1 F2 F3 F4 F5