Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 94)

Creating and Editing Ladder Program Files
6–3
Naming a Ladder Program File
1. Begin at the main menu and press
CONFIG OFFLINE
CONFIG
OFFLINE
PRG/DOC
F3
, then
CONFIG OFFLINE
CONFIG
PROCSSR
FUNCTNS
F1
. The following
menu appears:
FILE PROTECTED NAME TYPE SIZE (words)
0 system *
1 reserved *
2 ladder *
F1 F2 F6 F7 F3 F4 F8
CHANGE
PROCSSR
CHANGE
PASSWRD
CREATE
FILE
DELETE
FILE
CHANGE
PR. NAME
CHANGE
FL. NAME
MONITOR
FILE
Press a key, enter file number or file name
offline SLC 5/03 File EXAMPLE
PROGRAM DIRECTORY FOR PROCESSOR: EXAMPLE
F5
CLEAR
MEMORY
F9 F10
DATA
MONITOR
FILE
PROTECT
2. To name program file 2 of processor file EXAMPLE move the cursor to file 2
and press
CONFIG OFFLINE
CONFIG
CHANGE
FL. NAME
F4
. The prompt Enter New File Name(10 char
max) appears.
3. Type: Main and press [ENTER] . Valid characters include all alphanumeric
characters. The program file name is entered and appears as follows:
FILE PROTECTED NAME TYPE SIZE (words)
0 system *
1 reserved *
2 Main ladder *
F1 F2 F6 F7 F3 F4 F8
CHANGE
PROCSSR
CHANGE
PASSWRD
CREATE
FILE
DELETE
FILE
CHANGE
PR. NAME
CHANGE
FL. NAME
MONITOR
FILE
Press a key, enter file number or file name
offline SLC 5/03 File EXAMPLE
PROGRAM DIRECTORY FOR PROCESSOR: EXAMPLE
F5
CLEAR
MEMORY
F9 F10
DATA
MONITOR
FILE
PROTECT
4. Name another program file or press [ESC] and return to the previous menu.