Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 98)

Creating and Editing Ladder Program Files
6–7
An empty rung appears. The power rails of the rung are broken lines, indicating
that the rung is not yet accepted. The cursor is on the left power rail of the rung.
The data entry line indicates this to be rung 0. (The end rung is now rung 1.)
The status line indicates
RUNG INSERT , the current function.
4. Press
CONFIG OFFLINE
CONFIG
INSERT
INSTR
F4
, then
CONFIG OFFLINE
CONFIG
BIT
F1
. The following bit instructions appear:
Type a mnemonic or press a key for desired instruction
(file 2, rung 0)
offline
no forces INSTR INSERT File EXAMPLE
F10
OTHERS
F1
XIC
–] [–
F2
XIO
–] / [–
F3
OTE
–( )–
F4
OTL
–(L)–
F5
OTU
–(U)–
F6
OSR
5. Select
F1
XIC
–] [–
, Input Energize. The prompt line asks for the operand. Type
address: B3/10 and press [ENTER] . The following display appears:
Type a mnemonic or press a key for desired instruction class
(file 2, rung 0)
offline
no forces INSTR INSERT File EXAMPLE
F1
BIT
F4
COMPARE
END
F10
SPECIAL
F3
I/O
MESSAGE
F6 F7
MOVE/
LOGICAL
FILE
F5
MATH
F2
TIMER/
COUNTER
F8
SHIFT/
SEQNCER
F9
CONTROL
I
I
I
I I
I
I
I
] [
B3
10
The address appears with the instruction in the display area. At this point,
another instruction can be added using the same procedure.
6. After you have added all of the rung operations your application requires press
[ESC] to leave the Insert function.
7. Press
CONFIG OFFLINE
CONFIG
ACCEPT
RUNG
F10
to accept the rung. The power rails are now solid lines.