Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 287)

Preface
Advanced Programming Software User Manual
15–6
Changing Remote Modes
The status line in the Program Directory display below indicates that the processor
is online in REMote Program mode.
F1 F2 F6 F7 F3 F4 F8
PROCSSR
FUNCTNS RESTORE
CREATE
REPORTS
FILE
OPTIONS
RETURN
TO MENU
CHANGE
LINK ADR
MONITOR
FILE
Press a key, enter file number or file name
REM PROG L532 Series D Rev 4 PROC Addr 1
F5
WHO
ACTIVE
F9
DATA
MONITOR
F10
MEMORY
MAP
FILE PROTECTED NAME TYPE SIZE (words)
0 system 74
1 reserved 0
2 ladder 48
PROGRAM DIRECTORY FOR PROCESSOR: 05TEST
Once the online mode is selected, the Change Mode function is accessible from this
display by selecting either
CONFIG OFFLINE
CONFIG
PROCSSR
FUNCTNS
F1
or
CONFIG OFFLINE
CONFIG
MONITOR
FILE
F8
.
Mode selections are also directly accessible by pressing [ALT-C] when you are at
any of the following displays:
•
Online (program directory)
•
Monitor file
•
Force, monitor inputs, monitor outputs
•
Configure display
•
Data Monitor
•
General Utility or processor status