Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 321)

Preface
Advanced Programming Software User Manual
16–28
Transmit Enable: This data is mapped to memory location S:34/3 in the SLC 5/04
processor. A 1 in this location allows the SLC 5/04 processor to send out the
information in S:99 on the DH+ link as it’s Global Status Word. A 0 disables
transmitting. You can cursor to this entry and turn on/off Global Status Word
transmission.
Receive Enable: This data is mapped to memory location S:34/4 in the SLC 5/04
processor. A 1 in this location allows the SLC 5/04 processor to collect Global
Status Words from other devices on the DH+ link and stores them in memory
locations S:100–S:163. A 0 disables collection. You can cursor to this entry and
turn on/off Global Status Word collection.
The keys available at the Global Status File display perform the following functions:
Function Key Description
[F1] Binary Data
[F3] Decimal Data
These keys allow you to change the radix display. Decimal
[F4] Hex/BCD Data
These keys allow you to change the radix display. Decimal
Data is the default radix for the Global Status File.
[F5] ASCII Data
[F9] Save Configuration
Saves the current radix as the new default radix.
[F10] Exit Returns you to the previous status file screen.