Rockwell Automation 9323-PA1E USER MANUAL APS 6.0 - Manual (Page 388)

Transferring Program Files
21–15
4. Move the cursor in the right-hand window to EXAMPLE , then press
CONFIG OFFLINE
CONFIG
BEGIN
F1
SEND
.
The Waiting to Send display appears.
Press Control-C to abort
Term. Addr: 0 Emulation: 5/02
ROCKWELL SOFTWARE INCORPORATED
9323 SERIES SOFTWARE
SLC-500 PROGRAM TRANSFER UTILITY
Waiting to Send Program...
File Name : EXAMPLE .ACH
A total of 4 data, 4 program, and 2 force table(s)
20 Words in 4 Data Files, 78 Words in 4 Program Files,
2 Words in 2 Force Tables.
There are 0 undefined data and 0 undefined program file(s).
Leave this menu displayed while you set up the HHT terminal (node 4) to
receive the program file, or press
[CRTL-C] to abort the procedure.
To receive the program file, begin at the main menu on the HHT.
The following display appears:
SLC 500 PROGRAMMING SOFTWARE Rel. 2.03
1747 - PTA1E
Rockwell Software, Inc. Copyright 1990
All Rights Reserved
PRESS A FUNCTION KEY OFL
SELFTEST TERM PROGMAINT UTILITY
F1 F2 F3 F4 F5